4.76mm 3/16″ Steel Brake Line Tubing Galvanized Chromate Treated to Yellow 25ft Coil

25ft 7.62m Long packed in pancake coil or spring coil, or cut length per purchaser's requirement; MOQ 500 coils.

SKU: EI316SZY25 Category:
General Details

This tube is double walled, 720 degree seamed by copper brazing, used for aftermarket replacement of brake line, fuel line, transmission cooler line, and other low/medium pressure fluid/air transfer, made to SAE J527, ASTM A254, JASO M101, GOST 11249, IS 8119 etc. general standards for automotive hydraulic tubing.

The tube is easy to bend and flare, suitable for SAE 45 degree inverted flare, ISO/DIN bubble flare, ISO single flare etc.

Properties

OD 4.76+/-0.08mm
Wall 0.7+/-0.08mm
Tensil Strength 42000psi (290MPa)
Yield Strength 26100psi (180MPa)
Elongation ≥25%
Expansion ≥20%
Burst Pressure 110MPa, min
Zinc Plating 13μm, min
Salt Spray Test 100 hr, min

Inspections

  1. Eddy Current (Non-Destructive) & Visual Inspection
  2. Flattening & Bending Test
  3. Expansion & Flaring Test
  4. Tension Test
  5. Inside Surface Cleanliness Test
  6. Pressure Proof Test
  7. Neutral Salt Spray Test
  8. Gravel Impact Test

 

Send An RFQ