Blog

Zinc Plated Steel Brake Line Tubes Coiled & Shipped

Steel brake line tubes of more than 3 metric ton, including 3/16″, 1/4″, 5/16″ and 3/8″, were shipped on board and departed on 20th Oct, heading towards the buyer’s port. These tubes are zinc plated to more than 480 hr NSS test (anti-corrosion capability), cut in 6 and 26 meters, coiled, and packed in carton […]

News

Polymer Coated Steel Brake Line Tubes

Engineered Industries Limited supply polymer coated steel brake line tubes, also can be used for other fluid transfer of aotomobiles such as power steering, transmission cooler lines etc. Tubes are coated with polymer materials such as PVF, nylon, and epoxy for better corrosion protection than zinc plating. Tube size: 1/8″, 4mm, 3/16″, 6mm, 1/4″, 5/16″, […]

News

JASO M101 Metal Pipes for Automobile Tubing

1.  Scope This standard specifies the metal pipes for tubing mainly used for brakes, fuel and lubrication of automobiles (hereinafter referred to as the “pipes”). Remarks: The applicable standards for this standards are shown below. JIS G3141 Cold rolled carbon steel sheets and strip JIS G3445 Carbon steel tubes for machine structural purposes JIS G […]

Standards

SAE J1677 Tests and Procedures for Carbon Steel and Low Alloy Steel Tubing

1. SCOPE This SAE Standard is intended to establish uniform methods for testing certain types of carbon steel and alloy steel tubing listed in 2.1.1. The specified test and performance criteria applicable to each variety of tubing are set forth in the respective SAE J Specifications. 2. REFERENCES 2.1 Applicable Publications The following publications form […]

Standards

GM123M GM124M Automotive Steel Tubing For Fluid Handling

1 Scope These specifications cover two types of steel tubing suitable for automotive uses. There are requirements for the base metal, the optional coating materials, and the coated tubing. These requirements are applicable to the product coming out of the tube mills and the coating application lines, which are sometimes separate facilities. This tubing is […]

Standards

Indian Standard – IS8119 SPECIFICATION FOR COPPER BRAZED STEEL TUBING

0. FOREWORD 0.1 This Indian Standard was adopted by the Indian Standards Institution on 15 July 1976, after the draft finalized by the Steel Tubes, Pipes and Fittings Sectional Committee had been approved by the Structural and Metals Division Council. 0.2 There has been a long felt need for copper brazed steel tubes used specially in […]

Standards

SAE J527 Brazed Double Wall Low-Carbon Steel Tubing

1. Scope—This SAE Standard covers brazed double wall low-carbon steel tubing intended for general automotive, refrigeration, hydraulic, and other similar applications requiring tubing of a suitable quality for bending, flaring, beading, forming, and brazing. 2. References 2.1 Applicable Publications—The following publications form a part of this specification to the extent specified herein. Unless otherwise specified, the […]

Standards

ASTM A254 Copper-Brazed Steel Tubing

This standard is issued under the fixed designation A 254; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (e) indicates an editorial change since the last revision or re-approval. […]

Standards